Iz vaše države ne morete oddati naročila. United States

APART PA2240BP | 2-CHANNEL 100 VOLT POWER AMPLIFIER                             Poglej polno velikost

APART

APART PA2240BP | 2-CHANNEL 100 VOLT POWER AMPLIFIER

Apart PA2240BP je popolnoma opremljen 2-kanalni 100V ojačevalnik. Brez dvoma je ta ojačevalec zelo vsestranski in se lahko uporablja v vseh velikih 100 V projektih.

  • Vhod: Program : Balansiran Euroblock, 0 dB -10k - Nastavljiva glasnost s potenciometrom
  • Vhod: Prioriteta: Balansiran Euroblock, 0 dB -10k - Nastavljiva glasnost s potenciometrom
  • Izhodni signal: Zvočniški izhod: kanal 1 & 2: 4Ohm - 50V - 70V - 100V
  • Izhodni signal: Priority izhod: 2 x 24V, ki se sproži s stikom kontatkov (Max 0.6A)
  • Izhodna moč RMS: 2 x 240 W ali 1 x 480 W (premostitveni način)
  • Kontrole tona: Bas: 100 Hz: +10 dB / -14 dB
  • Kontrole tona: Visoki: 10 kHz: +10 dB / -14 dB
  • Frekvenčni razpon: 35 Hz - 22 kHz
  • Razmerje signal/šum: >95 dB
  • Harmonsko popačenje: < 0.5%
  • Dimenzije (V x Š x D): 88 x 430 x 412 mm. Odstranljivi 19" nosilci vključeni

 

Več informacij

03625007

Razpoložljivost: Dobavljivo v nekaj dneh | na zalogi

Dodaj v košarico

» Dodaj na moj seznam želja


PA2240BP

The Apart PA2240BP is a bridgeable and fully equipped 2 channel 100 Volt power amplifier. Without a doubt this amplifier is extremely versatile and can be used in all your big 100 Volt projects.

The amplifier can be used as a double channel amplifier of 2 x 240 Watts in 100 Volt or it can be bridged into a 1 x 480 Watt power amplifier in 100 Volt. Both channels have a program and priority input with independent gain control. The priority input can be activated by contact closure and as soon as this contact is closed, 24V output power becomes available (e.g. can be used to switch the relay of a volume control). Both channels of the amplifier have bass and treble tone control.

The PA2240BP operates on 230V AC and 24V DC, what makes him excel other power amplifiers. In this way the unit can easily be used in evacuation systems compliant to the EN60849 regulation.

As all the controls of the PA2240BP are located at the back pannel, changes of the amplifier's settings by unauthorised or unqualified people will most likely be prevented.

As reliability is extremely important in the install and conrtactor audio market, our R&D department has spent a lot of time on this issue. The use of quality components and the built in dynamic limiter at -3dB certainly contributes to increased reliability.
  • Input : Program : Balanced Euroblock, 0 dB -10k - Adjustable volume by trimmer
  • Input : Priority : Balanced Euroblock, 0 dB - 10k - Adjustable volume by trimmer
  • Output : Loudspeaker output : channel 1 & 2: 4Ohm - 50V - 70V - 100V
  • Output : Priority output : 2 x 24V, activated by contact closure (Max 0.6A)
  • Output power RMS Rated : 2 x 240 watt or 1 x 480 watt (bridged mode)
  • Tone control : Bass : 100 Hz: +10 dB / -14 dB
  • Tone control : Treble : 10 kHz: +10 dB / -14 dB
  • Frequency response : 35 Hz - 22 kHz
  • Signal to Noise ratio : > 95 dB
  • Total Harmonic Distortion : < 0.5%
  • Dimensions (H x W x D) : 88 x 430 x 412 mm (Detachable 19” brackets included)

Registracija NI potrebna!

Če odgovor na vaše vprašanje še ne obstaja, uporabite spodnji obrazec za oddajo vašega povpraševanja.

(*obvezno)
*(*obvezno)
Pošlji povpraševanje!

Oddelki

Proizvajalci

PrestaShop

PayPal

Audio-Technica Authorised Reseller Europe

Euromidi

Yamaha Revstar