Iz vaše države ne morete oddati naročila. United States

CARVIN V3 212 | 100W 3 CHANNEL ALL TUBE COMBO Poglej polno velikost

CARVIN

CARVIN V3 212 | 100W 3 CHANNEL ALL TUBE COMBO

Carvin V3 znova zmaguje! Predstavljamo inovativen, vrhunski 3-kanalni Combo ojačevalnik na elektronke, zaradi katerega ne bo treba razbiti prašička! S Celestion zvočniki za dodatek! Midi kontrola!

Trije kanali, 9 načinov delovanja = zvočna blaženost. Kompaktna oblika 2 x 12, Parallel in Serial zanka za efekte. MIDI kontrola VSE ZNAÄŚILNOSTI V3 GLAVE SO VKLJUÄŚENE! Blues, Metal, Fusion- ta combo zmore vse! ÄŚe povzamemo: Butična kakovost po zmerni ceni- paket, ki je prenosen in smrtonosen!

Več informacij

07519160

Razpoložljivost: Dobavljivo takoj | na zalogi

Dodaj v košarico

» Dodaj na moj seznam želja


The Carvin V3 does it again! Introducing an innovative, cutting edge 3 channel all tube Combo that won't break the bank! With Celestion Speakers to boot! Midi Controllable!

Three channels, 9 modes = tonal bliss. Compact 2x12 format Parallel and Series effects loops. Midi Control. ALL THE FEATURES OF THE V3 HEAD ARE IN THERE! Blues, Metal, Fusion, This combo can do it all! Bottom line: Boutique Quality at a real world price, in a package that's portable and lethal!

Master Controls

- Master volume: Controls output of all 3 channels. Boost or cut your entire rig with one control.
- Boost: Add up to 9 dB of volume boost, switch it on/off via the FS44 footswitch and MIDI.
- Bright: Boost highs starting at 5kHz for added clarity.
- Mid Cut: A unique mid cut helps dial in a master scooped tone from mild to extreme.
- Deep: Adds low frequencies at the sub-harmonic level
- Smart Loops: Total control of your effects, remembers your effects loop settings for each channel. Just assign a loop(s) to the currrent channel, Smart Loopâ„c permanently saves it until you change it.

Channel 1 & 2 Overdrive

3 Drive Modes:
a) "Center" - a classic rich, open overdrive with lots of headroom. Turning up the Drive knob adds sustain and warmth.
b) "Thick" - brings on the chunk with a massive low-end, textured mids and blistering highs. Turning up the Drive knob adds sustain to the highs, grit to the mids with low-end bark.
c) "Intense"- the most gain and sustain with notes that leap out with startling articulation. The low-end is deep and percussive. Mids and highs smoothly blend and still cut through. Turning up the Drive stretches the envelope of sustain to the edge.
EQX: Toggle between standard EQ and Expanded EQ. This switch opens a wider frequency range for the TREBLE and BASS. Presence: Boosting 8kHz to help cut through.

Channel 3 Clean

3 Drive Modes: a) "Center" - a classic rich, open clean sound with lots of headroom. Turning up the drive adds tube warmth and sag.
b) "Bright" - adds high end to the preamp, inviting high frequencies to chime and sustain as the Drive is turned up.

EQX: Toggle between standard EQ and Expanded EQ. This switch opens a wider frequency range for the TREBLE, MID and BASS.
Presence: Boost 11kHz for glassy, shimmering highs.

Frequently Asked Questions

What is the difference between each of the 3 channels?
A brief summary would be, Channel 1 and 2 are the overdrive channels and Channel 3 is the clean channel, however Channel 3 also has a Drive setting that can be used to turn Channel 3 into a 3rd overdrive Channel, that offers a different flavor of distortion from Channel 1 and 2. Channels 1 and 2 can be set up to be drastically different, or exactly the same.

What are those other knobs above Channel 3?
This is a Master section which affects all channels equally. Master (volume), Boost (boosts overall output when switched on). Bright, Mid CUT, and Deep are tone controls that are built-in to the power amp section of the V3.

What are the Drive Switches?
These 3-position switches change the way the distortion is staged. A host of variations are available even within a single channel. The use of the Drive Switch and the setting of the Drive Knob will yield a great deal of distortion flavors.

What is EQX?
The EQX switches provide an expanded EQ range when required. It can further the tonal landscape and provide two totally different lead tones between channels.

What are Smart Loops and how do they work?
Smart Loops are effects loops that can be assigned to specific amp channel(s). When you select a channel, you can always have a specific loop be in the ON or OFF state. For example, lets say you have a Reverb effect connected via Smart Loop 1 and a Delay effect on Smart Loop 2. You can assign Smart Loop 1 (reverb) to Channel 1, and assign Loop 2 (delay) to Channel 2. For Channel 3 you can assign both Smart Loops 1 and 2 (reverb and delay). Smart Loop memory is channel and/or MIDI dependent, so you don''t have to have a footswitch to use Smart Loops. The FS22 footswitch makes it possible to switch the loops independently of the channel. Smart Loop settings remain until you change them, even if you turn off or unplug the V3.

Is there a difference between Smart Loop 1 and 2?
Yes, Loop 2 is configured Parallel and Loop 1 is a Series loop. Loop 2 has a return level control on the rear chassis that allows further volume settings of the effects connected to this loop.

What do the Tail switches on the rear chassis do?
You can turn On (up) or Off (down) the ability to let an effect's tail ring out after you switch the loop off or switch to a different loop. For example, you can have a long delay ring out of the clean channel (Channel 3) after you''ve switched to a lead channel even if your lead channel is assigned to a different Smart Loop or no loop.

Registracija NI potrebna!

Če odgovor na vaše vprašanje še ne obstaja, uporabite spodnji obrazec za oddajo vašega povpraševanja.

(*obvezno)
*(*obvezno)
Pošlji povpraševanje!

Oddelki

Proizvajalci

PrestaShop

PayPal

Audio-Technica Authorised Reseller Europe

Euromidi

Yamaha Revstar